high voltage vacuum tester

Product Code: AHV009

Description: IBL make DC high voltage vacuum test set is suitable for testing the integrity of the vacuum circuit breaker. Input : 230V, 50Hz, single phase AC. Output : Continuously variable from zero to max. rated DC output voltage. Type X, denotes L if the set is used for laboratory purpose & P if the set is used for testing at sites. Output voltage Current capacity No. of units , if the set is used for laboratory purpose No. of units , if the set is used for testing at sites. DHVVAC30X 0 to 30KV DC 1mA max. Single (HV supply unit) Two (HV supply & control measuring units) DHVVAC60X 0 to 60KV DC 2mA max. Two (HV supply & control measuring units) Two (HV supply & control measuring units) If the Test Set is used for Laboratory purpose, then Test Chamber may be provided at extra cost. Duty Cycle: Intermittent ie. 5 mins. ON, 10 mins OFF. However, test sets of continuous or other duty cycles can also be manufactured at extra cost. Protection: Overload & short circuit provided. Zero start interlocking along with Overvoltage alarm & indication are provided. Metering: DC high voltage measured by means HV resistor chain along with micro-ammeter. Milliammeter measures the leakage current. Digital meters may be provided at extra cost. Discharge rod: A discharge rod is provided with the set.