Phantom Load Test Set

Product Code: MTB006

Description: These portable test sets with selectable three phase test voltage, adjustable test current and fully controllable power factor are suitable for site as well as laboratory testing of three phase kWh meters or instruments where specific selection and precise control of outputs are absolutely essential. Type Mains Input Rated Test Voltage Creep Test Voltage Test Current Starting Current Input/ phase Output/Phase Metering (Digital) PLNT1P01 415V, 3 ph., 4 wire, 50Hz.AC 230V, 1 ph., 50Hz. AC 253V Continuously variable from 0 to 120%. 0-5A, 0-10A & 0-20A 0 to 200mA 100VA 50VA Ammeter- 1 no. Voltmeter- 1no. Power Factor meter- 1no. PLNT3P03 415V, 3 ph., 4 wire, 50Hz. AC 110V or 400V, 3 ph., 4 wire, 50Hz. AC 121V or 440V Continuously variable 0-1A or 0-5A 5, 25mA 30VA Not less than 5VA 3 nos. Ammeter, 1 no. Voltmeter with selector switch. Phase angle meter- 1no. PLNT3P04 415V, 3 ph., 4 wire, 50Hz. AC. Optional: 110V 110V or 400V, 3 ph., 4 wire, 50Hz. AC 121V or 440V Continuously variable 0-1A or 0-5A 5, 25mA 30VA Not less than 5VA " PLNT3P05 415V, 3 ph., 4 wire, 50Hz. AC. 110V or 400V, 3 ph., 4 wire, 50Hz. AC 121V or 440V Continuously variable 0-1A or 0-5A 0.5%, 1%, 1.5% of the selected current range 30VA Not less than 15VA " Phase Shifter: Capacity 100VA Type: PLNT1P01 adjustable at any value between 0 lag-0.5 lag-unity-0.5 lead. Type: PLNT3P03, PLNT3P04, PLNT3P05 adjustable at any value between 0-3600 by coarse and fine control. Phase sequence indicator with press to read switch. Apart from the Type of Sets mentioned above, test sets are also manufactured as required by customer.